Shown here in this photo is one of our custom centre X member kit to be installed in an early 1950's pick up truck chassis. Supplied as shown with pre notched pipes and bent tube for tail shaft clearance as well as the rear transmission mount. 42mm x 3.2 wall mild steel will provide the rigity needed for a modified early car chassis to pass beaming tests etc.  Supplied as an unassembled flat pack as shown these are a pick up only item. POA.

At this years ASRF street rod nationals I saw a neat chassis on display that had our exhaust hanger brackets fitted to it.  I love seing our products being used in different ways to achieve a good result, well done.

This pic shows one of our Hot Rod IFS units before it left the workshop.  This one was set up to take an R6 air bag on each side, have full shocker travel for ride tuning and have a total of 5" of drop from ride height.  The problem with conventional coil over style air bags is the limited travel, typically you only get half of this drop which does not have the desired dramatic effect that this design gives. However this can not be designed as a bolt in unit, the chassis has to be altered to suit the IFS unit.  I am running a Flaming River manual steering rack, the Straight arrow model.  Here at Kustom Bitz we can set these racks up properly and modify them when correct geometry requires it.

Shown here is a 4 bar brackets I have designed to locate a 9inch diff with coil over shocks on the rear end of a lowered 1969 - 72 model F100. I use big rubber bushes oversize 4 bar tubes and utilise the leaf spring forward mounts to keep chassis modifications limited to the rear end notch for diff clearance. I will post some more pics of the finished set up soon, it has worked a treat. Kustom Bitz can custom make 4 bars to suit any application. All custom work is done at an hourly rate.

This 34 Ford Tudor at the Melbourne Hot Rod Show this year features our Lakes Hot Rod Parts IFS by Kustom Bitz. Stainless steel one piece upper and lower control arms and stainless steel stub axles and steering components. It looks a treat now that the car is finished, congratulations to the owner for a job well done.